background image

3

 

Compact High Flow Inline Water Filter Systems

Cartridge Replacement

To maintain the high quality of the purified water the cartridges need changing every 6 - 

12 months, dependent on water quality and usage.

You can obtain replacement cartridges from your local Puretec dealer. To maintain 
performance standards and warranty, use only genuine Puretec replacements.

Replacement cartridge code for 

Z2

 model: Puretec 

Z2-R

.

Before Installation

This system comes complete with an installation kit enabling it to be connected to 15mm 
(½”) male thread to an existing tap or mixer tap (cold supply only - hot water should be 

filtered prior to heating). Also includes extending kit, where extra length is required.

Installation Note: 

A water filter system/tap, like any product, has a limited lifespan 

and if not replaced, will eventually fail. Failure can happen early due to unforeseen 
circumstances. To avoid possible property damage, this product should be regularly 

examined for leakage and/or deterioration and replaced when necessary. We strongly 
recommend that a drain pan, plumbed to an appropriate drain or outfitted with a 

leak detector, be used in those applications where any leakage could cause property 

damage. We also strongly recommend that the water supply be turned off, upstream 
to the water filter system/tap, if no one is home for an extended period of time. 

INSTALLATION SHOULD BE COMPLETED BY QUALIFIED TRADESPEOPLE. FAULTY 

OPERATION DUE TO UNQUALIFIED PERSONS WILL RESULT IN VOIDED WARRANTY 

COVERAGE. 

Installation Requirements

1.  15mm (½”) cold water flexi-connector to tap.

2.  Water supply pressure: 200 - 520 kPa.

Note:

 Where line pressure exceeds 500 kPa, an approved pressure limiting device must be 

installed to comply with Australian & New Zealand Plumbing Standards.

3.  Water supply temperature: 0° - 38 °C (protect from freezing).

Alternative fittings may be required if being connected to anything other than 15 mm (½”) 

copper pipe (copper pipe not included). No electrical or drainage requirements.

Cartridge Replacement

Содержание PureMix Z2













Отзывы: