Puretec HybridPlus P12 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 28

Puretec HybridPlus P12 Скачать руководство пользователя страница 3

3

HYBRIDPLUS SERIES

| Complete Household Water Filtration & Pressure System

Puretec Customer Service

Thank you for purchasing a Puretec HybridPlus Series Complete Household Water
Filtration & Pressure System. Your system is a proven performer manufactured from
quality materials and components and will give years of ‘spring like’ water, free of
impurities, if maintained and installed properly (refer installation requirements p.6).

HybridPlus P3, P6, P9 & P12 models

include a Grundfos pump and are covered by

Grundfos for the warranty as stated in the Grundfos user guide. For assistance please
call the Puretec Customer Service Helpline on 1300 140 140 (Australia) or
0800 130 140 (New Zealand).

Introduction

Puretec's HybridPlus Series is specifically designed to kill harmful bacteria in untreated
water supplies and to deliver stable water flow on demand to every tap/outlet in the
house. It uses a natural purification process that’s eco-friendly and

chemical-free. It includes pre-filtration to ensure that particulate matter does not shield
micro-organisms from the UV light.

This system will effectively treat water, depending on the required UV dosage and

existing water quality.

The HybridPlus systems are suitable for tank only, mains water back-up, bore water and

surface water treatment (subject to water quality) but can be used in other situations.
For other types of water supply please contact your local Puretec stockist or call our
Puretec Customer Service Helpline on 1300 140 140 (Australia) or
0800 130 140 (New Zealand).

The Puretec HybridPlus system cartridges and lamp need replacing regularly to maintain
optimum performance. This is a simple procedure when following instructions. For
replacements contact your nearest Puretec stockist.

Your new Hybrid system incorporates a failure warning feature that warns you of a lamp
failure by:

1.

An LED warning light

2.

An audible alarm

In addition, when the alarm “beeps” on and off, the lamp is due to be changed so
effective treatment is maintained. A Green LED indicates that the system is operating

correctly.

Introduction

«
1
2
3
4
5
...
»

Содержание HybridPlus P12





























Отзывы:

Нет отзывов