21
HYBRIDPLUS SERIES
| Complete Household Water Filtration & Pressure System
Maintenance Procedure
top of the chamber. Now remove the aluminium
nut from the bottom of the stainless steel
chamber, securing the spring and quartz sleeve.
Important:
Be aware that the water within in
the chamber will be discharged through the
bottom of the stainless steel chamber once the
bottom aluminium nut is removed.
Important:
The quartz sleeve may come
through the base of the chamber after the
bottom aluminium nut is removed, hold the bottom of the quartz sleeve and remove
the bottom O-ring.
5. Slide the quartz sleeve
through and out of the top
of the chamber.
6. Clean the quartz sleeve with
Puretec SC1000 spray (or
alcohol based cleaner).
7. Slide the quartz sleeve into the top of the chamber and
carefully slide down through the bottom opening. Place the
bottom O-ring on the quartz sleeve and screw the bottom
aluminium nut on to the chamber while still holding the sleeve
from the top. Gently tap the sleeve to ensure that it's sitting
firmly on the bottom aluminium nut.
8. Place the top O-ring on the sleeve, insert the spring and screw
on the top nut.
9. Slowly insert UV lamp into chamber through the hole of the
aluminimum nut at the top of the chamber. Connect the lamp
connector to the pins on the white lamp socket. Do not let go of
the lamp until the lamp is securely connected to the socket.
Never touch the quartz (glass) and lamp surface as marks or
fingerprints may interfere with UV transmission. If lamp is soiled,
please clean lamp with an alcohol based cleaner.
1
2
3
valve
IN
OUT
10
mins
4
5
6
Replacing UV Lamp
7
8
Replacing UV Lamp
IN
OUT
1
2
3
valve
IN
OUT
10
mins
4
5
6
Replacing UV Lamp
Fig. 14
Cleaning Quartz Sleeve
9
1
2
3
4
5
O Ring
O Ring
valve
3
4
5
6
7
8
9
Replacing UV Lamp
valve
IN
OUT
4
5
O Ring
3
O Ring
Cleaning Quartz Sleeve
9
1
2
3
4
5
O Ring
Cleaning Quartz Sleeve
1
2
3
valve
IN
OUT
10
mins
4
5
6
Replacing UV Lamp
7
8
9
Replacing UV Lamp
valve
IN
OUT
1
2
3
4
5
O Ring
O Ring
Fig. 13
