manualshive.com logo in svg

Purelogic HYD-2100, Инструкция по эксплуатации

Поделиться
Скачать
Purelogic HYD-2100 Скачать руководство пользователя страница 23

HYD-2100. 

CNC Plasma&Flame Cutting Control System

Edition of 28.07.2015 

23

www.purelogic.ru

8 (800) 555 63 74

Press SPACE to enter the cutting interface, there are two kind of operation:

1. Move from current position to the new position and then cutting

• Press F1 in the cutting interface, the system will directly run to the position of the selected row or number without cutting, then pause and wait for the 

next operation.

Press Y , the system will also directly move to 

the selected row and number, then pause and 

wait for the next operation. 

2. Cutting from the current position.

After the prompt of Fig 4.14, press X, then 

the system will start cutting from current 

position. 

RESTORE

If you want to cancel all of operations with 

graphics including mirror, rotation, adjust, 

scale and array, press [F7] in the part options 

menu, the system automatically revert to 

original state of the graphics.

Figure 29. Operation after selecting row/number

Содержание HYD-2100





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды