PureLink VIP-T300H-U, Руководство пользователя

Страница: 25 / 28

VIP-T300H-U USER MANUAL
VERSION 1.1
74
Diagnostic Information Diagnostic Information
0 = Disable
1 = Enable
1 X
80
Video Routing Video Routing setting
0 ~ 999 = Specific Channel
1000=Follow Channel
1000
X
81 Audio Routing Audio Routing setting
1000
X
82
USB Routing USB Routing setting
1000
X
83
RS-232 Routing RS-232 Routing setting
1000
X
84
IR Routing IR Routing setting
1000
X
85 GPIO Routing
GPIO Routing setting
1000
X
86
Load Routing Mapping Load Free Routing Mapping
0~4
A X
87
Save Routing Mapping Save Free Routing Mapping A X
90
Video Wall Max Row Rows of Video Wall
0~7
0 X
91
Video Wall Max Column Columns of Video Wall
0~15
0 X
92 Monitor Row Position Monitor Position in Row 0~7 0 X
93
Monitor Column Position Monitor Position in Column
0~15
0 X
94
Monitor Outside Width Outer Width of Monitor
0~65000 (0.1mm)
0 X
95
Monitor Outside Height Outer Height of Monitor 0 X
96 Monitor Viewable Width Width of Viewable Area 0 X
97
Monitor Viewable Height Height of Viewable Area 0 X
100
Stretch Type Stretch Type
0 = Stretch Out
1 = Fit In
1 X
101
Rotate Rotation and Mirror 0 ~ 7 0 X
102
Vertical Shift Vertical Shift
400 = Default
399 ~ 0 = shift up
401 ~ 801 = shift down
400
X
103
Horizontal Shift Horizontal Shift
400 = Default
399 ~ 0 = shift left
401 ~ 801 =shift right
400
X
104
Vertical Scale Vertical Scale
0 ~ 255
0 X
105
Horizontal Scale Horizontal Scale 0 X
200 Backup Setting Backup Setting to bank 0~4
0 ~ 4
A A
201 Restore Setting Restore Setting from bank 0~4 A A
202 System Setting System Setting
0~255 (Debug use, no recommend
for general users)
A A
203 Application Setting Application Setting A A
333 Reset To Default Reset to factory default A A
999 System Reboot System Reboot A A
A = Available X = Not available Numbers = default value
Notes on Menus
 Menu 17 Free Routing function only works in Multicast mode.
 Menu 25 Display or hide video wall functions in the web UI.
 Menu 26 CEC function only available in unicast mode.
 Menu 20~25 To set select function connect to fix channel, not follow channel switching.
 Menu 32 To set customize IR remote, need to be import to RX by RS-232 or Telnet command
 Menu 35 For monitors which detect HDMI 5V to enter sleep mode.
 Menu 36 Turn off monitor by CEC command via RX.
 Menu 40 Customize resolution need to be setup by RS-232 command or web page
 Menu 44 Use default EDID at TX side, copy monitor EDID at RX side.
 Menu 47~48 Monitor HDCP version setting, with incorrect HDCP version setting it will show
black screen.
HDCP Always On
HDCP 2.2 Always
On
Description
Disable Disable HDCP version follow source and Stream Type of