PureLink PM-16X, Руководство пользователя

Страница: 75 / 98

PureLink by Dtrovision
75
Enter the Connection status check command below. Replace the “#”s with the Input and
Output number(s).
*255?I#!

or *255?O#!

Note) For PM-128X and PM-256X, input and output # uses three digit format, instead
of two digits. For example;
Input 01 (I001), Input 05 (I005), Output 01 (O001) and Output 100 (O100)
Examples (Video status):
Command Codes Action
*255?I01!

Check Video Output connection status on Input 1
*255?O07!

Check Video Input connection status on Output 7
*255?ALLIO!

Check Video all Input and Output connection status
Examples (Audio status):
Command Codes Action
*255A?I01!

Check Audio Output connection status on Audio Input 1
*255A?O07!

Check Audio Input connection status on Audio Output 7
*255A?ALLIO!

Check Audio all Input and Output connection status
Input Board Function Configuration
Input Board's Video and/or Audio function can be configured via command control.
Configuration command can be sent to individual port or multiple ports at once.
IV: Input Video source select command
IA: Input Audio source select command
IF: Input channel information request command
IE: Input Extender source select command
IP: Input Extender command transmission (pass through) command
IV: Input Video Source Select
The "IV" is an initiation command for Input Video selection. The characters and
numbers that follow the "IV" command tell the system, which Input # will be set to
which Video source. The last character “!” is found at the end of a command code
which tells the system to execute the command.