pureHeat GARAGE&PATIO, Руководство пользователя

Страница: 8 / 16

8
1 . Begin by connecting the Bottom Post
(Post with a Flat Base) to the Base, using
the provided Four (4) M6*30 Screws.
2 . Slide the Base Cover over the connected
post to cover the screws and then slide
One (1) Large Cord Clip over the post.
3 . Place the Middle Post (Optional for extra
17.5” height) onto the Bottom Post and
fasten them together using Three (3) M5*6
Screws on the sides. Slide the remaining
(1) Large Cord Clip over the post.
4 . Place the Large and Small Cord Clips
on the Top Post then place the Post
onto the Middle Post (or Bottom Post if
you want a lower height) and fasten
them together using Three (3) M5*6
Screws on the sides.
UNIT SETUP - Floor Stand
INSPECT THE UNIT FOR DAMAGE BEFORE SETUP OR USE.