Altec AIR
P8400W Air-dryer User’s Guide
Page 22 of 110
P017585 – Rev. A
With Compressor(s) running:
6.5.23.2
Use a 1-inch paint
brush to dab soapy water
on the air fitting or hose
connection to be tested.
If air bubbles appear at the
connection, this indicates that
air is leaking from the
connection.
If any leaks are detected, take steps to seal them off (as necessary):
Tighten the fitting
Re-connect the hose end
Replace the fitting / hose / component
6.5.24
Re-install the front panel.
6.5.25 REGISTER YOUR DRYER. See section 7. for details.
