SAVE THESE INSTRUCTIONS!
- This product is for indoor locations only.
- The NSUDM-CAP-_ connector conducts power from a
remote power supply to one NSUDM-_ Nova Up/Down
Suspension Modular Channel.
IMPORTANT INFORMATION
1718 W. Fullerton Chicago, IL 60614
Ph: 773.770.1195 ● Fax: 773.935.5613
www.PureEdgeLighting.com ● [email protected]
© 2016 PureEdge Lighting. All Rights Reserved.
Doc # 904-NSUDM-CAP_01
Installation Instructions for
Nova Up/Down Suspension Modular
End Cap Power Connector
NSUDM-CAP
Section One: Connecting Channel Sections
1:
Align the male pin carrier with the top female connector on the End Cap Power Connector.
2:
Push the male pins completely in the female connector of the End Cap Power Connector and then lift the carrier up to
remove it.
3:
Repeat steps 1 and 2 for the middle female connector of the end cap.
PIN CARRIER
END CAP
POWER
CONNECTOR
PIN
CARRIER
END CAP
POWER
CONNECTOR
END CAP
POWER
CONNECTOR
PINS
1
2
3
3
A
4:
Align the channel assembly with the End Cap Power
Connector.
END
CAP
CHANNEL
B
4
1
