PureAire TX-KE, Инструкция по эксплуатации

Страница: 24 / 26

PureAire Monitoring Systems, Inc. 2/22/2000
23
5.4 Sensor Calibration Kits
The TX-KE and TX-KP require periodic calibration with the appropriate
standard gas. Calibration should be performed whenever:
•
The membrane or electrolyte is replaced;
•
The entire sensor is replaced;
•
Six months has passed without membrane, electrolyte, or sensor replacement.
The PureAire Calibration Kit (optional) is recommended for calibration.
5.4.1 Gas Generation and Calibrating Kits
For generating a calibrating gas, the following PureAire Gas Generation Kits are
recommended. They are available by separate order.
Calibration Kit Model K-I
PH
3
K-II
Cl
2
K-III
HCN
K-IV
SO
3
K-V
H
2
S
K-VI
NH
3
K-VII
HCl
K-VIII
HF
Gas generation tubes 1 box 1 box 1 box 1 box
Gas generation solution (10 ml) 2
bottles
2
bottles
2
bottles
2
bottles
Soft paper towels 1 pack 1 pack 1 pack 1 pack 1 pack
Gas detection tube 1 box 1 box 1 box 1 box 1 box 1 box 1 box 1 box
Gas sampling bags (5 liter,
1 valve)
2 2 2 2 2 2 2 2
Gas sampling pump
SCAP1
1 1 1 1 1 1 1 1
Double bellows 1 1 1 1 1 1 1 1
Teflon

tube (
φ
6
× φ
4) 1 m 1 m 1 m 1 m 1 m 1 m 1 m 1 m
Calibration Cap (optional) 1 1 1 1 1 1 1
Mini-pump PUMP2N (optional) 1 1 1 1 1 1 1
Instruction manual 1 1 1 1 1 1 1 1
Case 1 1 1 1 1 1 1 1
Silicon tube (
φ
8
× φ
4) 1 m 1 m 1 m 1 m 1 m 1 m 1 m 1 m
Reagent 1 1 bottle 1 bottle 1 bottle 1 bottle
Reagent 2 1 bottle 1 bottle 1 bottle 1 bottle
Dispenser bottle (100 ml) 1 bottle 1 bottle 1 bottle 1 bottle