Pure Water MINI CLASSIC CT, Руководство пользователя

Страница: 8 / 16

8
UNPACKING YOUR MINI-CLASSIC CT
Your Pure Water Mini Classic CT water purification system
is shipped to you in a durable carton. Carefully remove the
contents from the box.
The Pure Water Mini-Classic CT carton contains:
• The Pure Water Mini-Classic CT distiller.
• Glass container and lid.
• Filter kit.
• Owners Manual and Warranty Card.
• Power Cord (Not included in 240 Volt machines).
If these are not present, please look for the Quality Assurance
Inspection Slip and note the name of the inspector. Call your
Distributor; or, in the event you can’t reach them, contact Pure
Water Customer Service Department at 402-467-9300.
Note: Save the box and packing materials for future use in the
unlikely event your Mini Classic CT should require service
work.
FIRST TIME START-UP
Starting the unit for the first time:
1. Open the door (5) and remove the boiling chamber (1)
by pulling on the handle.
2. Remove the lid (4) by turning the black lid knob counter-
clockwise and moving the lid (4) side to side and lift out.
3. Fill the boiling chamber (1) with cold tap water until the
water touches the bottom of the water level indicator (2).
DO NOT overfill.
4. Replace the lid (4) on the boiling chamber (1). Turn the
black lid knob clockwise and tighten firmly, ensuring a
good seal.
5. Push the boiling chamber (1) into the left side of the dis-
tiller until it fits snug and clears the blue decal.
6. Close the door.
7. Remove lid, and put the drinking water container (10) in
place.
Note:
DO NOT install the post filter at this time. Keep the
first batch of distilled water for soaking the post filter.