Pure Water Fountain Classic, Инструкция по установке и эксплуатации

Страница: 6 / 20

Page 6 Fountain Classic Owner’s Manual
Getting to Know the Fountain Classic
1.
Photo Display Photo Display
Photo Display Photo Display Photo Display—This is a backlit area to display photos or advertising. Several
optional displays are available from Pure Water, Inc. or from your local dis-
tributor.
2.
Water Dispensing Area Water Dispensing Area
Water Dispensing Area Water Dispensing Area Water Dispensing Area—Three temperature units have dispensers for Hot
Water, Room Temperature Water, and Cold Water and the two temperature
unit has dispensers for Room Temperature Water and Cold Water. The
Controls for these are listed in items 14 and 15.
3.
Drip Tray Drip Tray
Drip Tray Drip Tray Drip Tray—The hidden drip tray collects water that spills from the Dipsensing
Area. This must be routinely emptied to prevent overflows and spillage.
4.
Water Inlet Water Inlet
Water Inlet Water Inlet Water Inlet—Raw water from the local supply enters the machine at this
location. It is important to use the cold water supply.
5.
Water Inlet Solenoid Water Inlet Solenoid
Water Inlet Solenoid Water Inlet Solenoid Water Inlet Solenoid—This valve automatically opens to allow water to flow into
the Boiling Chamber when the water level is low.
6.
Removable Boiling Chamber Removable Boiling Chamber
Removable Boiling Chamber Removable Boiling Chamber Removable Boiling Chamber—This is where the raw water is heated to boiling.
Contaminants from the water stay in this chamber. It is important that this
chamber is drained and periodically cleaned of residue per instructions. For
more information see page 11.
7. Heating Element Heating Element
Heating Element Heating Element
Heating Element—This heating element heats the raw water to boiling. The
standard heating element is 1400 Watts.
8. Safety Reset Safety Reset
Safety Reset Safety Reset
Safety Reset—This mechanical safety feature ensures that if the heating ele-
ment continues when not covered with water, the unit will turn off automati-
cally.
9.
Boiling Chamber Drain Valve Boiling Chamber Drain Valve
Boiling Chamber Drain Valve Boiling Chamber Drain Valve Boiling Chamber Drain Valve—As the steam evaporates from the raw water, the
contaminants in the water in the boiling chamber can become very concen-
trated. This valve allows you to drain the contaminants off, so that they do not
build up.
10. Steam Tube Steam Tube
Steam Tube Steam Tube
Steam Tube—The steam created in the boiling chamber rises through this tube
to the condensing coil at the top of the unit.
11. Condensing Coil and Fan Assembly Condensing Coil and Fan Assembly
Condensing Coil and Fan Assembly Condensing Coil and Fan Assembly
Condensing Coil and Fan Assembly—The steam from the steam tube enters the
condensing coil. The fan turns on, and sends cooling air past the coil. The
steam is cooled and condenses to distilled water. The condensing coil has
two small volatile gas vents to allow the volatile gases to escape.
Photo
Display
Here
1
2
3