Pure Power Tools 10.8V Li-ION Multi-tool, Оригинальное руководство пользователя

Страница: 8 / 12

8
SPECIFICATION
PURE MULTI-TOOL
Voltage: 10.8V-DC
No Load Speed: 17000 -
- oscillations per minute
Noise and Vibration Data
Sound Pressure: L
PA
75.5dB(A) K=3dB
Sound Power: L
WA
86.5dB(A) K=3dB
Vibration: 4.139 m/s 2 K 1.5 m/s 2
The declared vibration total value has
been measured in accordance with a
standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also
be used in a preliminary assessment of
exposure.
WARNING
: The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used. The need
to identify safety measures and to protect
the operator are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating
cycle, such as the times the tool is switched
off, when it is running idle, in addition to
trigger time)
Accessories
Instruction Manual 1pc
Scraper Blade 1pc
Cutting Blade 1pc
Tri-Form Sanding Pad 1pc
Sandpaper 1pc
Allen Key 1pc
OPERATING INSTRUCTIONS
Note: Before using this tool, read the
instruction manual carefully.
BEFORE USE
A Battery Pack must be inserted into the
tool as detailed below. It is important that
the Battery Pack is of the designated type
recommended for this machine.
Newly purchased Battery Packs do not
come fully charged.
Please refer to
the PURE CHARGER MANUAL for full
details on how to charge the Battery
Pack for this machine
1. INSTALLING OR REMOVING THE
BATTERY PACK
Check that the battery pack is of the
designated type for this machine. We
recommend that the slide switch is locked
in the OFF position when removing or
inserting the Battery Pack. Refer to section
2 below.
a. Slide the Battery Pack into the end of
the tools handle. The Battery can only fit
one way round.
b. Gently push the Battery Pack fully into
the tools handle to engage the locking
tabs. The electrical connections inside the
handle will be made automatically.
c. To remove the Battery Pack, simply
press the two locking tabs with your finger
and thumb and withdraw the Battery Pack
from the handle.
2. ON/OFF SLIDE SWITCH
This tool is fitted with a slide switch. When
pushed forwards with your thumb the
switch will automatically lock in the ‘ON’
position.
To switch ‘OFF’ press the rear of the slide
switch (labeled ‘OFF’) and the switch will
return to the ‘OFF’ position.