Pure Power Tools 10.8V Li-ION Multi-tool, Оригинальное руководство пользователя

Страница: 4 / 12

4
5. Store idle tools.
When not in use, tools
should be stored in a dry locked-up place,
out of children’s reach.
6. Never force the tools.
Your tools will be
more efficient and safer when used at the
rate for which they were intended.
7. Use the right tool.
Do not force small tools
to do the job of a heavy duty tool. Do not use
tools for purposes not intended; for example
do not use circular saws to cut tree limbs
or logs.
8. Dress properly.
Do not wear loose clothing
or jewellery which may get caught in moving
parts. Non-skid footwear is recommended
when working outdoors. If you have long
hair, tie it back and wear protective hair
covering.
9. Use protective equipment.
Use safety
glasses. Use face or dust mask if cutting
operations create dust.
10. Connect dust extraction equipment.
If
the machines have a connection for dust
extraction equipment, ensure these are
connected and properly used.
11. Do not damage the cable.
Never pull
the power cable to disconnect the machine.
Keep the cable away from heat, oil and
sharp edges.
12. Secure workpiece.
Where possible,
use clamps or a vice to hold the workpiece.
It’s much safer than using your hands.
13. Don’t over reach.
Keep proper footing
and balance at all times.
14. Maintain tools in good working condition.
Keep cutting tools sharp and clean for better
performance and optimum safety. Follow
instructions for lubricating and changing
accessories. Inspect power cables regularly
and, if damaged, have them replaced by an
authorised service centre. Inspect extension
cables regularly and replace immediately if
damaged. Keep handles dry, clean and free
from oil and grease at all times.
15. Disconnect tools.
Disconnect tools from
the power supply when not in use, before
any maintenance operation and when
changing accessories such as blades, bits,
cutters, etc.
16. Remove adjusting keys and spanners.
Get into the habit of checking that adjusting
keys and spanners have been removed from
the machine before turning it on.
17. Avoid unintentional starting.
Ensure
switch is in “off” position before plugging in
the machine.
18. Use proper extension leads.
When the
tool is used outdoors, use only extension
leads intended for outdoor use and labelled
as such.
19. Stay alert.
Concentrate on what you
are doing, use common sense and do not
operate the tool when you are tired.
20. Check that no part is damaged.
Before
using a tool, make sure that it is in good
working order. Check the alignment and
condition of moving parts, mounting and any
other aspect that may affect its operation. A
guard or other part that is damaged should
be properly repaired or replaced by an
authorised service centre unless otherwise
indicated in this instruction manual. Do not
use the tool if the switch does not turn on
and off.
21. Warning.
The use of any accessory or
attachment other than one recommended in
this instruction manual may present a risk of
personal injury.
22. Have your tool repaired at an
authorised service centre.
This electric
tool complies with current safety rules.
Repairs should only be carried out by an
authorised service centre using original
spare parts. Failing this, the user could
expose themselves to considerable danger.