Pure Power Tools 10.8V Li-ION Multi-tool, Оригинальное руководство пользователя

Страница: 5 / 12

5
10.8V Li-ION
Multi-tool
HEALTH ADVICE
Warning!
When drilling, sanding, sawing or grinding,
dust particles will be produced. In some
instances, depending on the materials
you are working with, this dust can be
particularly harmful to you (e.g. lead from
old gloss paint).You are advised to consider
the risks associated with the materials you
are working with and to reduce the risk of
exposure.
You should:
-Work in a well-ventilated area.
-Work with approved safety equipment,
such as dust masks that are specially
designed to filter microscopic particles.
ADDITIONAL SAFETY RULES FOR
YOUR MULTI-TOOL
1. Do not expose to rain or water.
2. Do not drop, shake or strike the battery.
3. Wear hearing protection when necessary.
Exposure to noise can cause hearing loss.
4. Cutting blades and accessories can
become very hot. Take care when changing
or handling any bits or accessories.
3. Recharge the battery only with the
charger specified by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
4. Use this power tool only with specially
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
5. When the battery pack is not in use,
keep it away from other metal objects like
paper clips, coins, keys, nails, screws or
other small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
6. Under extreme conditions electrolyte
may be leak from the battery. If contact
accidentally occurs, flush your skin with
water. If electrolyte contacts your eyes,
additionally seek medical help. Electrolyte
from the battery may cause irritation or
burns.
7. Hold the tool by the insulated gripping
surfaces, especially when performing an
operation where the cutting bit may contact
hidden wiring. If the cutting tool contacts
a ‘live’ wire, exposed metal parts of the
power tool could become ‘live’ and give the
operator an electric shock.
8. If possible, use clamps or a vice to hold
your work.
9. When cutting into walls, floors or similar
areas, make sure, as far as possible, that
there are no services (gas or water pipes,
electric cables etc) in the path of the
cutting blade. Striking hidden services
could cause injury to the user and damage
to the property.
10. Always hold the tool with both hands
for maximum control. Keep proper footing
at all times.
11. Keep hands away from the cutting area.
Do not reach under material being cut.
12. Do not use bent, dull or damaged blades.
13. Exercise caution when handling any
of the accessories. The accessories
(particularly blades) are very sharp.
14. Before beginning scraping, check the
workpiece for embedded nails etc. If there
are nails etc, either remove them or set them
well below the intended finished surface.
15. Do not ‘wet’ sand with this tool. Liquids
entering the motor housing is an electrical
hazard. Never work in an area which is
soaked with a liquid. There could be an
electrical shock hazard if you were to use
this tool in such conditions.