PuraLuft ARP-800A, Инструкция по эксплуатации

Страница: 25 / 164

23
(1) Wind modes: Normal, smart, natural and sleep. During the startup it
defaults to the normal wind mode and there is no LED display visible.
(2) Four-gear wind speed: High, middle, low and mute.
(3) Humidification/cooling.
(4) Cold and warm conversion (cold air 110W, warm air: low level 1200W,
high level 2000W).
(5) The warm air has temperature setting function. The temperature range
is 15°C~35°C. When the ambient temperature is higher than the set
temperature, the warm air state will change to the cold air state.
(6) Timer off function: timing introduction should be progressively increased
at 1H and the maximum timing time is 8H.
(7) Wind direction: Automatic left-right swinging (wind direction rotates at
80° when the blades rotate), manual up-down swinging.
(8) Electronic button control, timing of nixie tube display and room
temperature.
(9) With infrared remote control functions.
(10) Full-pumping water tank which is convenient for cleaning.
(11) Huge wet curtain with super large area is used to provide large
evaporation and good cooling effect.
(12) Spray water cycle refrigeration technology is used to provide large water
cycle amount and cool faster.
(13) Tank water shortage protection.
(14) Universal roller design of front caster.
(15) Power off memory function.
(16) Contains anion to purify the air.
(17) With HEPA function.
(18) Carbon filter.
(19) Dumping power protection function.
II. FEATURES