PB3 User Instruction
Page 4 of 39
1. INTRODUCTION AND SAFETY
1.1 General
WARNING
These Instructions must always be kept close to product's operating location or directly
with the product.
PUMPIRAN's products are designed, developed and manufactured with state-of-the-art technologies in modern
facilities. The unit is produced with great care and commitment to continuous quality control, utilizing
sophisticated quality techniques, and safety requirements.
PUMPIRAN is committed to continuous quality improvement and being at service for any further information
about the product in its installation and operation or about its support products, repair and diagnostic services.
WARNING
These instructions are intended to facilitate familiarization with the product and its
permitted use. Operating the product in compliance with these instructions is important to
help ensure reliability in service and avoid risks.
These instructions must be read prior to installing, operating, using and maintaining the
equipment. The equipment must not be put into service until all the conditions relating to
safety, noted in the instructions, have been met.
1.2 CE marking and approvals
Where applicable, the Directives and any additional Approvals, cover important safety aspects relating to
machinery and equipment and the satisfactory provision of technical documents and safety instructions. Where
applicable this document incorporates information relevant to these Directives and Approvals.
1.3 Disclaimer
Information in these User Instructions is believed to be reliable. In spite of all the efforts of PUMPIRAN
to provide sound and all necessary information the content of this manual may appear insufficient and is
not guaranteed by PUMPIRAN as to its completeness or accuracy.
PUMPIRAN manufactures products to exacting International Quality Management System Standards as
certified and audited by external Quality Assurance organizations. The failure to properly select, install or use
authorized PUMPIRAN parts and accessories is considered to be misuse. Damage or failure caused by misuse is
not covered by PUMPIRAN's warranty.
1.4 Duty conditions
This product has been selected to meet the specifications of your purchase order. The acknowledgement of these
conditions has been sent separately to the Purchaser.
WARNING
The product must not be operated beyond the parameters specified for the
application. If there is any doubt as to the suitability of the product for the
application intended, contact PUMPIRAN for advice, quoting the serial number.
