Pulse STAGEPAR-108, Руководство пользователя

Страница: 36 / 37

37
11.5.2 Example B
This example shows how to set up eight LED PARs to be controlled in 3ch DMX master
mode. The patterns are still send out for 4channels.
Connection:
MASTER SLAVE1 SLVAE2 SLAVE3 SLAVE 4 SLAVE 5 SLAVE6 SLAVE8
UNIT1 UNIT2 UNIT3 UNIT4 UNIT5 UNIT6 UNIT7 UNIT8
Master setup:
The master unit, UNIT1, the master unit, need to be set by this table:
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 Colour pattern selection
0 0 0 0 0 1 0 0 1 0 chaser pattern 1, right to left, same colour each step
SW4 SW3 SW2 SW1 Mode
0
1 1 0 DMX master 3ch
The item show ch1, ch2, ch3.
SLAVE1:
SLAVE1, UNIT2, DMX start channel 4:
10 Pin Dipswitch 4 Pin Dipswitch
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 SW4 SW3 SW2 SW1
0 0 0 0 0 0 0 1 0 0 0 1 0 1
The item start to receive with the DMX ch4.
The items consumes ch4, ch5, ch6.
SLAVE2:
SLAVE2, UNIT3, DMX start channel 7:
10 Pin Dipswitch 4 Pin Dipswitch
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 SW4 SW3 SW2 SW1
0 0 0 0 0 0 0 1 1 1 0 1 0 1
The item start to receive with the DMX CH7.
The items consumes ch7, ch8, ch9.
SLAVE3:
SLAVE3, UNIT4, DMX start channel 10:
10 Pin Dipswitch 4 Pin Dipswitch
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 SW4 SW3 SW2 SW1
0 0 0 0 0 0 1 0 1 0 0 1 0 1
The item start to receive with the DMX ch10.
The items consumes ch10, ch11, ch12.