Pulse STAGEPAR-108, Руководство пользователя

Страница: 16 / 37

17
7.2 Colour pattern setting
7.2.1 Red Colour
The red colour may be set by the 10pin dipswitch on the backside of the LED PAR according
to the this table:
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 Red colour brightness
0 X X X X X X 0 0 0 0%
0 X X X X X X 0 0 1 14%
0 X X X X X X 0 1 0 28%
0 X X X X X X 0 1 1 42%
0 X X X X X X 1 0 0 57%
0 X X X X X X 1 0 1 71%
0 X X X X X X 1 1 0 85%
0 X X X X X X 1 1 1 100%
0 = dipswitch is set to off
1 = dipswitch is set to on
X = see table below
7.2.2 Green Colour
The green colour may be set by the 10pin dipswitch on the backside of the LED PAR
according to the following table:
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 Green colour brightness
0 X X X 0 0 0 X X X 0%
0 X X X 0 0 1 X X X 14%
0 X X X 0 1 0 X X X 28%
0 X X X 0 1 1 X X X 42%
0 X X X 1 0 0 X X X 57%
0 X X X 1 0 1 X X X 71%
0 X X X 1 1 0 X X X 85%
0 X X X 1 1 1 X X X 100%
0 = dipswitch is set to off.
1 = dipswitch is set to on.
X = see table above or below