Pulse STAGEPAR-108, Руководство пользователя

Страница: 27 / 37

28
9.5 Examples
9.5.1 Example A
This example shows how to set up four LED PARs to be controlled in 5ch DMX master
mode.
Connection:
MASTER
SLAVE1 SLVAE2 SLAVE3
UNIT1 UNIT2 UNIT3 UNIT4
Master setup:
Master unit, UNIT1, need to be set by this table:
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 Colour pattern selection
0 0 0 0 0 1 0 0 1 0 chaser pattern 1, right to left, same colour each step
SW4 SW3 SW2 SW1 Mode
0
1 0 0 DMX master 5ch, speed control by potentiometer
The items consumes ch1, ch2, ch3, ch4, ch5.
SLAVE1:
SLAVE1, UNIT2, DMX start channel 6:
10 Pin Dipswitch 4 Pin Dipswitch
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 SW4 SW3 SW2 SW1
0 0 0 0 0 0 0 1 1 0 0 0 1 1
The item start to receive with the DMX channel 6.
The items consumes ch6, ch7, ch8, ch9, ch 10.
SLAVE2:
SLAVE2, UNIT3, DMX start channel 11:
10 Pin Dipswitch 4 Pin Dipswitch
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 SW4 SW3 SW2 SW1
0 0 0 0 0 0 1 0 1 1 0 0 1 1
The item start to receive with the DMX channel 11.
The items consumes ch11, ch12, ch13, ch14, ch15.
SLAVE3:
SLAVE3, UNIT4, DMX start channel 16:
10 Pin Dipswitch 4 Pin Dipswitch
SW10 SW9 SW8 SW7 SW6 SW5 SW4 SW3 SW2 SW1 SW4 SW3 SW2 SW1
0 0 0 0 0 1 0 0 0 0 0 0 1 1
The item start to receive with the DMX channel 16.
The items consumes ch16, ch17, ch18, ch19, ch20.