31
10 DMX slave 3ch
The 3channel slave mode is for use with a standard DMX controller. The LED PAR can be
controller with all 512 channels. Each colour is controlled by one DMX channel. All 512
DMX channels can be used. Dipswitch 1 to 9 sets the first channel to receive.
10.1 Mode setting
To enable the DMX slave 3ch mode, set the 4pin dipswitch on the backside of the LED PAR
according to the this table:
SW4
SW3
SW2
SW1
mode
X
1
0
1
DMX slave 3ch
0 = dipswitch is set to off
1 = dipswitch is set to on
X = in this mode there is no speed control by potentiometer or music supported
10.2 DMX usage
1. DMX CH = RED
2. DMX CH = GREEN
3. DMX CH = BLUE