background image

6

OPERATING INSTRUCTIONS
Navigating the Control Panel:

• 

Access the control panel functions using the four panel buttons located directly 

beneath the LCD.

MENU

Used to access the menu or to go to 

a previous menu option.

UP

Scrolls through the menu options in 

ascending order

DOWN

Scrolls through the menu options in 

descending order

ENTER

Used to select and store the current 

menu or option within a menu

• 

The control panel LED display shows the menu item that you have selected.

• 

When a menu item is selected, the display will show immediately the first available 

option for the selected menu function. To select a menu item, press 

ENTER

.

• 

Press the 

MENU

 button repeatedly until you reach the desired menu function. Use 

the 

UP

 and 

DOWN

 buttons to navigate the menu options.

• 

Press the 

ENTER

 button to select the menu function currently displayed, or to 

enable a menu option.

• 

To return to the previous option or menu without changing the value, press the 

MENU

 button.

PHOTOMETRIC DIAGRAM

ADdr

CHnd

16CH

21CH

A001-A512

SHnd

SLnd

MAST

SL 2

SL 1

SH 1

SH 3

SH 2

SH 4

MENU

Содержание IMPSTAR 40













Отзывы: