background image

12

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF 

ELECTRICAL & ELECTRONIC EQUIPMENT.

When this product has reached the end of its life it must be treated as Waste Electrical 

& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with 

general household waste, but kept separate for the treatment, recovery and recycling 

of the materials used. Contact your local authority for details of recycling schemes in 

your area.

Made in China. PR2 9PP

Man Rev 1.0

CLEANING & MAINTENANCE

• 

Disconnect from the mains before starting the maintenance operation.

• 

Frequent cleaning is recommended. Use a soft lint-free moistened cloth. 

• 

Do not use any chemicals, abrasives or solvents that could damage the device.

• 

There are no user-serviceable parts in this product. Refer all servicing to qualified 

personnel.

SPECIFICATION

Voltage

AC 100-240V 50-60Hz

Power Consumption

60W

Light source

40W RGBW LED WITH 5050 SMD 3in1

DMX mode

16/21 Channel

Control

DMX 512, Master-slave, Auto, Sound

Display

Digital display

Rotating angle

X axis: 540°, Y axis: 210°

Function

4 internal program, sound controlled by DMX 512

Work environment

10°C - 40°C

Dimension

155 x 160 x 280mm

Weight

4.0kg

115-149 

5050 SMD section 4 Red mix Green

150-184 

5050 SMD section 4 Red mix Blue

185-219 

5050 SMD section 4 Green mix Blue

220-255 

5050 SMD section 4 RGB

21 

000-199 

No function

200-209 

Reset

210-239 

No function

240-255 

Sound Active

Содержание IMPSTAR 40













Отзывы: