Pulse-Eight neo:X+, Руководство пользователя

Страница: 15 / 92

TURNING ON THE MATRIX
13. Insert the supplied power cord and plug into the AC mains.
14. Turn ON the power switch.
15. As it powers ON, the front panel LEDs (System Health, Network, Cloud) will illuminate momentarily
before it begins its initialization sequence.
Note: The initialization process takes between 20 seconds and up to 2 minutes. However, it is possible
that a firmware update may be available the first time the unit is powered ON - in this instance the matrix
may take longer to initialize. If both the System Health and Network LEDs flash (orange/green) quickly
together then a firmware update is being applied. Please wait and do not disconnect the power until this
update has completed.
16. Once initialization has been completed, the System Health, Network and Cloud LEDs should all
appear ON (green).
17. You are now ready to setup the matrix using the web interface. Please follow the steps in the
'Connecting to Admin Web Interface' section.