Pulse-Eight Binary neo XMR, Руководство пользователя

Страница: 9 / 40

DESIGNED FOR BINARY BY
PULSE EIGHT
9
INSTALLATION
Installing In A Rack
1 Attach the rack ears to the front sides of the matrix using the provided screws
2 Install into the rack and connect cabling according to the mode of operation – as described below
WARNING : To prevent damage, it is important to ensure adequate ventilation space on the sides of the
matrix, especially on the ventilation openings on the side of the product enclosure
!
1 Connect HDMI cables from your video sources (eg Blu-Ray player) to the HDMI inputs of the matrix
2 If required, connect the compatible IR Flasher (Emitter/Transmitter) cable to the ‘Flasher’ port (blue) on the matrix
and the IR bud placed over the source device’s IR window
1 Connect the appropriate category cable (Cat6 or higher recommended) to each HDBaseT output ports that
you require
2 Complete the connection by attaching the other end of the Cat cable to a supplied neo Receiver’s ‘HDBaseT In’
port The neo Receiver should be situated at the output end (ie next to the TV)
Note: It is recommended, for ease of setup, to connect devices from Input 1 to Input 6 first.
Note: It is recommended, for ease of setup, to connect devices from Output 1 to Output 6 first.
Note: Use only neo:Ultra Receiver (P8-HDBT2-U-RX-S) or neo:UltraSR Receiver (P8-HDBT2-L-RX-S)
Connecting The Inputs
Connecting The HDBaseT Outputs