www.pulsar.pl
PSBEN5012D
BLACK POWER
20
- press
„OK”
- the current address of the PSU will be displayed
-
use the „<” or „>” buttons in order to set the address
1÷ 247
– address of the PSU during the communication with the computer
- confirm by pressing
„OK”
- in order to return to the main menu, si
multaneously press the „<,>” rightmost
and leftmost buttons
5.3.4
Setting the transmission speed
„trS”
applies to cooperation with PowerSecurity.
All the parameters responsible for communication between the PSU and the computer, namely the
address, parity and speed should have the same settings for both the PSU and the PowerSecurity program.
The PSU has preset transmission parameters of 115200 baud 8E1. However, if it is connected to the
network with differently defined parameters, make the appropriate changes to its configuration.
-
simultaneously press the „<,>” rightmost and leftmost buttons
-
the „tSt” parameter will be displayed
-
use the „<” or „>” buttons to display the „trS” parameter
- press
„OK”
- the information about the transmission speed will be displayed
-
use the „<” or „>” buttons in order to set the required transmission speed,
- 9.6k
:
- 115.2k
(factory setting)
- confirm by pressing
„OK”
-
in order to return to the main menu, simultaneously press the „<,>” rightmost
and leftmost buttons
