www.pulsar.pl
PSBEN5012D
BLACK POWER
32
9. Technical inspections and maintenance.
Technical inspections and maintenance can be performed after disconnecting the power supply from the
power network. The PSU does not require any specific maintenance; however, its interior should be cleaned with
compressed air if it is used in dusty conditions. In case of fuse replacement, use only compatible replacement
parts.
Technical inspections should be carried out not less frequently than once per year. During the inspection,
check the batteries and run the battery test.
4 weeks after installation, re-tighten all screw connections, see Fig. 2 [9].
WEEE LABEL
According to the European Union WEEE Directive, waste electrical and electronic equipment
should be disposed of separately from normal household waste. Waste electrical and electronic
equipment must not be disposed of with normal household waste.
CAUTION!
The power supply unit is adapted for cooperation with the sealed lead-acid batteries (SLA). After the operation
period they must not be thrown but recycled according to the applicable law
Pulsar sp. j.
Siedlec 150, 32-
744 Łapczyca, Poland
Phone (+48) 14-610-19-40, Fax (+48) 14-610-19-50
E-mail:
