Pulsar PSBEN 3012D/LCD, Руководство пользователя

Страница: 4 / 44

www.pulsar.pl PSBEN3012D/LCD
BLACK POWER
4
1. PSU features.

EN50131-
6 compliance, 1÷3 grades and II
environmental class

mains supply of 230VAC

uninterrupted voltage of 13,8VDC

fitting battery: 40Ah/12V

high efficiency 70%

PSU current efficiency:

2,6A
– for grades 1 , 2 *

1,33A
– for grades 3 **

3A
– for general use ***
(see: chapter 3.1)

low level of voltage ripple

microprocessor-based automation system

intelligent management of PSU’s output power level

‘SERIAL’ communication port with implemented
MODBUS RTU protocol

remote monitoring (option: Wi-Fi, Ethernet, RS485,
USB)

free program -
‘PowerSecurity’ for monitoring the PSU
operation parameters

load current control

output voltage control

output fuse status control

dynamic battery test

battery circuit continuity control

battery voltages control

battery fuse status control

battery charge and maintenance control

deep discharge battery protection (UVP)

battery overcharge protection

battery output protection against short circuit and
reverse polarity connection

jumper selectable battery charging current
0,2A/0,6A/1A/1,5A

remote battery test (additional module required)

START button for battery activation

STOP button for disconnecting during battery-assisted
operation

optical indication
– LCD panel

electrical parameters reading, e.g.: voltage, current

failure indication

PSU settings adjusted from the panel’s level

3 levels of access, password-protected

PSU’s operation history

failure history

real-time clock, battery-backed

optical indication of PSU overload OVL

acoustic indication of failure

adjustable times indicating AC power failure

technical inputs/outputs with galvanic isolation

EXT IN input of collective failure

EPS technical output indicating AC power loss

PSU technical output indicating PSU failure

APS technical output indicating battery failure

internal memory of PSU operating status

protections:

SCP short circuit protection

OLP overload protection

OHP overheat protection

OVP over voltage protection

surge protection

against tampering: unwanted opening of the
enclosure or detachment from the mounting surface

convectional cooling

warranty
– 5 year from the production date