Pulsar IMP Lite 10, Инструкция по эксплуатации

Страница: 18 / 38

Page13
Using the Menu System
The menu system has been designed to make the changing of parameters very
simple. Once in the
Program Mode the display will show a line of text that
displays the menu system. Pressing the Up and Down buttons will scroll the
display between the menu items, (as shown below, starting at APP).
As you press the UP and DOWN buttons to scroll left and right between the
menu options, you can press
ENTER
at any time to select a specific menu
which will then take you to the parameters within the selected menu.
Once you have reached the relevant menu, scroll through the parameters, and
enter the necessary information. To enter the information, use the UP and
DOWN keys to increment or decrement the digit, and the ENTER
key to shift
the flashing digit to the next position, once you have completed entering the
value required pressing the ENTER button again will save the value.
When you have finished, press
CANCEL
to go back to the previous level. When
you have reached the top level, then the
IMP Lite
will ask for confirmation
before allowing you to go back into run mode. This is done by pressing
ENTER
at the display prompt.
APP
(Application)
Uol
(Volume)
DiSP
(Display)
LOOP
(mA Output)
Cop
(Compensation)
SyS1
(System)
tESt
(Test)
StA
(Stability)