PSBS2012B
BLUE POWER
6
1.4 Technical parameters:
- Electrical parameters (Table 3)
- Mechanical parameters (Table 4)
- Safety of use (Table 5)
- Operation parameters (Table 6)
Table 3. Electrical parameters
PSU type:
A (EPS - External Power Source)
Mains supply
230V AC / 50Hz (-15%/+10%)
Current consumption
0,23A @230V AC
PSU’s power
31W
Efficiency
71%
Output voltage
11V÷ 13,8V DC – buffer operation
1
0V÷ 13,8V DC – battery operation
Output current
2A + 0,2A battery charging
1,7A + 0,5A battery charging
Output voltage adjustment range
12÷14,5V DC
Ripple voltage
20mV p-p max.
PSU current consumption
15 mA
Battery charging current
0,2A or 0,5A
– jumper selectable
Short-circuit protection SCP
Electronic - current limitation and/or activation of the F
BAT
melting fuse in the battery circuit (failure requires fuse
replacement)
Automatic return
Overload protection OLP
110-150% of the PSU power, manual restart (failure
requires the disconnection of the DC output)
Battery circuit protection SCP and reverse
polarity connection
F3,15A- current limitation, the F
BAT
melting fuse (failure
requires fuse replacement)
Surge protection
varistors
Deep discharge battery protection UVP
U<10
V (± 0,5V) – disconnection of battery terminal
Tamper protection:
- TAMPER output indicating enclosure opening or
detachment from the wall
- micro switch x 2 NC contacts (enclosure closed and
mounted to the mounting base), 0,5A@50V DC (max.)
Optical indication: front panel of the PSU
- AC OK.; LED indicating the AC power status
- DC OK.; LED indicating the DC supply at the PSU
output
- BAT OK.; LED indicating the battery voltage
- red, normal operation: permanently illuminated,
failure: off
- green, permanently illuminated, failure: off
- green, permanently illuminated,
failure: off
Technical outputs:
- EPS; output indicating AC power failure
- PSU; output indicating no DC power/PSU failure
- LoB output indicating low battery voltage
- OC type: 50mA max.
Normal operation: L state (0V),
failure: hi-Z state,
- delay time 10s/60s (+/-20%)
– jumper selectable
T
AC
- OC type: 50mA max.
Normal operation: L state (0V),
failure: hi-Z state,
- OC type, 50mA max.
Normal operation (U
BAT
>11,5V): L state (0V),
failure (U
BAT
<11,5V): hi-Z state
The power supply unit does not feature a battery detection
function.
Fuses:
- F
MAINS
- F
BAT
T 500mA / 250V
F 3,15A / 250V
