www.pulsar.pl
AWZ333
6
Output current
3A (without a battery)
2,6A + 0,4A battery charge
2,1A + 0,9A battery charge
(step 1 = 1,4A)
Battery charge current
0,4A / 0,9A -
jumper selectable
Current consumption by PSU systems
15 mA max.
Short-circuit protection SCP
200% ÷ 250% of PSU power - current limitation and/or
fuse damage in the battery circuit (fuse-element
replacement required)
Overload protection OLP
110% ÷ 150% (@25ºC÷65ºC) of PSU power -
limitation by the PTC resettable fuse, manual restart
(disconnection of the DC output circuit)
Battery circuit protection SCP
F5A- current limitation, F
BAT
fuse (in case of a failure,
fuse-element replacement required)
Over voltage protection OVP
U >17 V disconnection of the output voltage,
automatic return
U > 14,5 V fault indication
Deep discharge battery protection UVP
U < 10 V (± 5%) – disconnection of the –BAT terminal
Technical outputs:
- AW output indicates PSU fault:
output (SCP, OCP, OVP status);
battery (UVP, SCP status)
- BS output indicates mains power failure
- TAMPER - indicates unwanted opening of the
enclosure
- OC type, 50mA max.
normal status: L level (0V), failure: hi-Z level
- OC type, 50mA max.
normal status: hi-Z level, failure: L level (0V),
- microswitch, NC contacts (enclosure closed),
0,5A@50V DC (max.)
LED indication
LEDs: AC/DC power status, failure
Acoustic indication
piezoelectric indicator 75dB/0,3m, ON/OFF function
F1 fuse
F 5A
F2 fuse
T 630 mA/ 250V
Mechanical specifications (tab. 4).
Enclosure dimensions
230 x 300 x 90+8
mm
(Rys.3) WxHxD
Fixing
205 x 275, Φ 6 (Rys.3) WxH
Fitting battery
17Ah/12V (SLA)
Net/gross weight
3,5/3,7 kg
Enclosure
Steel plate DC01, thickness: 0,7mm, colour: RAL 9003
Closing
Cheese head screw (at the front)
Notes
The enclosure does not adjoin the assembly surface so
that cables can be led.
Operation safety (tab.5).
Protection class PN-EN 60950-1:2007
I (first)
Degree of Protection PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500V/DC
Operating specifications (tab.6).
Operating temperature
+5ºC...+40ºC
Storage temperature
-20ºC...+60ºC
Relative humidity
20%...90%, without condensation
Vibrations during operation
unacceptable
Impulse waves during operation
unacceptable
Direct insolation
unacceptable
Vibrations and impulse waves during transport
PN-83/T-42106
