Pulsar AWZ 333, Быстрый старт

Страница: 4 / 12

www.pulsar.pl AWZ333
4
[5]
AC pins: Z1, Z2 - configuration of time lag for AC failure indication

Z1= , Z2= time lag T= 0s

Z1= , Z2= time lag T= 5min
 Z1= , Z2= time lag T= 1h
 Z1= , Z2= time lag T= 6h
BAT pins: Z1, Z2 – time configuration of discharged battery disconnection
 Z1= , Z2= time lag T= 20s
 Z1= , Z2= time lag T= 15min
 Z1= , Z2= time lag T= 1h
 Z1= , Z2= no battery disconnection
Caption: jumper on, jumper off
[6]
+BAT - DC supply output of the battery
(+BAT= red, -BAT = black)
[7] RED DIODE LED indication
[8] GREEN DIODE LED indication
[9] CHARGE pin
[10] ~AC~ AC power connector
[11]
Connectors:
TAMPER -
contacts of the sabotage protection switch (NC)
BS - AC absence technical output – OC type (open collector)
hi-Z level = status: AC supply
L level
= status: AC power failure
AW - technical output of the PSU operation status – OC type (open collector)
hi-Z level = status: failure
L level = status: correct operation
+AUX- DC supply output
(+AUX= +U, -AUX=GND)
[12] P1 voltage adjustment
[13] F
BAT
fuse in the battery circuit
Fig. 2. The view of the PSU pcb.