ww.pulsar.pl
ADOC551230
2
Features:
13,8VDC/3A uninterrupted supply
wide range of supply voltage 88÷264VAC
high efficiency 71%
battery charge and maintenance control
deep discharge battery protection (UVP)
battery charging current 0,23A
battery output protection against short circuit
and reverse polarity connection
LED indication
FAC technical output indicating AC power loss
– OC and relay type
FPS technical output indicating PSU failure
– OC and relay type
FLB technical output indicating battery low
voltage
– OC and relay type
protections:
SCP short-circuit protection
OVP over voltage protection
surge protection
OLP overload protection
warranty – 5 year from the production date
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of PSU components and connectors
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
3.2 Technical outputs
4. Operation and use.
4.1 Overload or short circuit of the PSU output
4.2. Battery-assisted operation
4.3. Maintenance
1. Technical description.
1.1 General description
A buffer PSU is intended for an uninterrupted supply to devices requiring stabilized voltage of
12 V DC
(+/-15%).
The PSU provides voltage of
13,8V DC
with current capacity
I=3A + 0,23A battery charge
. In case of
power decay, a battery back-up is activated immediately.
During normal operation, the total current drawn by the receivers may not exceed I=3A.
Maximum battery charging current: 0,23 A. Total device c battery: 3,23 A max.