Pulsar Measurement IMP Lite, Инструкция по эксплуатации

Страница: 8 / 38

IMP LITE INSTRUCTION MANUAL
8
Product Specification
PHYSICAL
Dimensions O/A height186mm x O/A diameter 133mm (5.24” x
7.32”)
Mounting 1.5” BSP/NPT (IMP3 and 6 models) 2” BSP/NPT
(IMP10)
Weight Nominal 1 kg
Cable entry detail 2 off cable glands 4.5 – 10mm. (torque to 2NM)
ENVIRONMENTAL
IP Rating (Wall) IP67
Max. & min. temperature
(Ambient)
-40ºC to +65ºC (-4ºF to 149ºF)
Max. & min. temperature
(Transducer)
-40ºC to +85ºC (-4ºF to 176ºF)
CE Approval See EU Declaration of Conformity
PERFORMANCE
Beam angle (-3dB half power) <10° inclusive
Operating frequency Lite 3 125kHz, Lite 6 75kHz, Lite 10 41kHz
Range Lite 3 0.2 – 3m (0.66 – 10ft)
Lite 6 0.3 – 6m (0.98 – 20ft)
Lite 10 0.3 – 10m (0.98 – 33ft)
Current output 3.5 – 22mA
Accuracy ± 0.25% or 6mm (0.24 inches) whichever is greater
Resolution ± 0.1% or 2mm (0.08inches) whichever is greater
4-20mA output
Resolution 5
µA
Temperature compensation Via internal temperature sensor (± 0.5°C accuracy)
Response time Power up to stable reading = 10 seconds
PROGRAMMING
PC Programming Via RJ11 port to RS232 using IMP PC software
On-board programming Via 4 button keypad and a 4-digit LCD display
SUPPLY
Power supply 11 - 30V DC
Pulsar Measurement Limited operates a policy of constant development and
improvement and reserve the right to amend technical details, as necessary.