14
7.1
Complete re-assembly of the diaphragm, reagent head, and external components if
they were taken apart. Ensure that reagent head and tie-bar bolts are tightened
according to the appropriate torque specifications
7.2
Remove the pressure gauge from the housing body and replace it with a straight
tubing adaptor fitting. This will be referred to in this document as the “outlet side”
Figure 6 – fitting for priming “outlet side”
7.3
Remove the plug from the inlet side needle valve on the front of the reagent head,
and install a hose adaptor fitting. This will be referred to in this document as the
“inlet side”.
Figure 7 – “inlet side”
Fitting
