6
2.0 Introduction
The
PULSAlarm® ®
is a microprocessor based stroke length control device for use with
the
PULSA
diaphragm-metering pump. It has been designed to operate in a variety of
industrial environments.
3.0 Foreword
The pumps to which these “instructions” refer to are
designed for use in industrial areas
and therefore cannot be treated as retail products. The present documentation gives
instructions to be used by qualified personnel only.
It must be used in compliance with
the regulations, laws and technical standards in force
and cannot, under any
circumstances, take the place of plant standard or additional regulations, including any
which are not legally enforceable, which have been issued with the scope of ensuring
safety.
Equipment with special manufacturing or constructive variances may differ in details with
respect to this description.
In case of any difficulty, please contact PULSAFEEDER, INC. Technical Service.
The PULSAlarm® is rated for NEMA 7 locations as identified on the nameplate.
The PULSAlarm® complies with both ATEX and IEC IECEx standards.
The following standards apply to this product:
IEC 60079-0 6
th
Edition
IEC 60079-1 6
th
Edition
IEC 60079-31 1
st
Edition
EN 60079-0:2012+A11:2013
EN 60079-1:2007
EN 60079-31:2009
