Pulsafeeder PULSAlarm Pulsa Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 6 / 18

7
The following standards apply to this product:
IEC 60079-0 6th Edition
IEC 60079-1 7th Edition
IEC 60079-31 2nd Edition
EN 60079-0:2012+A11:2013
EN 60079-1:2014
EN 60079-31:2014
3.0 Introduction
Reciprocating diaphragm metering pumps require a flexible diaphragm to separate the fluid
that is being pumped from the hydraulic fluid that is moving diaphragm back and forth
causing its pumping action. To be certain that the diaphragm is properly sealed the
PULSAlarm® Leak Detection System can be included. It uses a special dual layer
diaphragm. When one layer of this diaphragm fails, it passes system pressure to an
indicating pressure switch known as the
PULSAlarm® Leak Detection Switch Assembly. It
has been designed to operate in a variety of industrial environments including hazardous
locations.