Pulsafeeder PULSAblue 3300 Series, Руководство по установке и эксплуатации

Страница: 38 / 60

37
If the AUTOTROL TURB 2 IN. is selected:
The controller will confirm that the AUTOTROL TURB 2 IN. has been selected and you will be asked if
you want to reset
the total count for that meter to zero. Press ‖
1
‖ for
YES
or press ‖
2
‖ for
NO .
17 Set-up the 4-20mA Output
If the 4-20mA option is ordered the controller will have two channels of 4-20 mA outputs. The 4-20mA is
an option card that can be added in the field.
17.1 Set Up of the 4-20mA Output
To set up the 4-20 mA output:
From the Main Menu
, press ‖
6
‖
4-20 mA OUTPUTS
4-20 MA OUTPUT
====================
1 420A
2 420B
Press ‖
1
‖
For channel A 4-
20 mA OUT SETUP. Press ‖
2
‖
For channel B 4-20 mA OUT SETUP
The
4-20 mA Out Setup screen allows the user to set the 4-20 mA range, calibrate the 4-20 mA
output, select which process the 4-20 mA channel will respond to, take manual control of the 4-20
mA output, and change the name of the output. Below is the
4-20 mA Setup screen.
4-20 MA OUTPUT
====================
1 SET 4-20 MA RANGE
2 CALIBRATE 4-20 mA
3 WHICH PROCESS?
4 MANUAL CONTROL
5 CHANGE MY NAME
17.2 Set the 4-20mA Range
The 4-20 mA output range must be set for the output to be useful.
From the 4-20 mA OUTPUT
screen, press ‖
1
‖
Set the 4-20 mA RANGE.
Use the keypad to enter a conductivity or ORP value for the 4-
mA point. Press ‖
ENT
‖.
Use the keypad to enter a conductivity or ORP value for the 20-
mA point. Press ‖
ENT
‖.