FPS300.245-049-102
All parameters are specified at 24V, 12.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
Apr. 2022 / Rev. 0.1 DS-FPH500-EN
2 / 28
I
NDEX
INDEX ............................................................................... 2
Intended Use ........................................................... 4
Installation Instructions .......................................... 4
AC-Input .................................................................. 5
DC-Input .................................................................. 6
Input Inrush Current ............................................... 6
Output ..................................................................... 7
Hold-up Time .......................................................... 9
Output-OK Relay Contact ..................................... 10
Efficiency and Power Losses ................................. 11
Lifetime Expectancy .............................................. 12
MTBF ...................................................................... 12
Functional Diagram .............................................. 13
Dimensions and Connector Variants .................... 14
User Interface ........................................................ 15
EMC........................................................................ 18
Environment .......................................................... 20
Safety and Protection Features ............................. 21
Dielectric Strength ................................................. 22
Approvals and Fulfilled Standards ........................ 23
Regulatory Compliance ......................................... 23
Accessories ............................................................. 24
DIN RAIL Mounting KIT: ZM.FPDRA-11 ....... 24
Mounting Braket: ZM.FPMBA-11................. 24
Connectors .................................................... 25
Related Products .................................................... 26
Application Notes .................................................. 27
Repetitive Pulse Loading .............................. 27
External Input Protection ............................. 27
Inductive and Capacitive Loads ................... 27
Back Feeding Loads ...................................... 27
Mounting Orientations ................................ 28
The information given in this document is correct to the best of our knowledge and experience at the time of publication.
If not expressly agreed otherwise, this information does not represent a warranty in the legal sense of the word. As the state
of our knowledge and experience is constantly changing, the information in this data sheet is subject to revision. We
therefore kindly ask you to always use the latest issue of this document (available under www.pulspower.com).
No part of this document may be reproduced or utilized in any form without our prior permission in writing.
Packaging and packaging aids can and should always be recycled. The product itself may not be disposed of as domestic
refuse.
T
ERMINOLOGY AND ABREVIATIONS
PE and Symbol
PE is the abbreviation for
P
rotective
E
arth and has the same meaning as the symbol
.
Earth, Ground
This document uses the term “earth” which is the same as the U.S. term “ground”.
T.b.d.
To be defined, value or description will follow later.
AC 230 V
A figure displayed with the AC or DC before the value represents a nominal voltage with
tolerances (usually ±15 %) included.
E.g.: DC 12 V describes a 12 V battery disregarding whether it is full (13.7 V) or flat (10 V)
230Vac
A figure with the unit (Vac) at the end is a momentary figure without any additional tolerances
included.
50Hz vs. 60Hz
As long as not otherwise stated, AC 100V and AC 230V parameters are valid at 50Hz mains
frequency. AC 120V parameters are valid for 60Hz mains frequency.
may
A key word indicating flexibility of choice with no implied preference.
shall
A key word indicating a mandatory requirement.
should
A key word indicating flexibility of choice with a strongly preferred implementation.
Us
Sensor output
Ua
Actor output
