PISA11.CLASS2
PISA11-Series
P
ROTECTION
M
ODULE
24V,
4
O
UTPUTS
23.
U
SED
S
UBSTANCES
The unit does not release any silicone and is suitable for the use in paint shops.
The unit conforms to the RoHS directives 2002/95/EC and 2011/65/EC.
Electrolytic capacitors included in this unit do not use electrolytes such as Quaternary Ammonium Salt Systems.
Plastic housings and other molded plastic materials are free of halogens.
Wires and cables are not PVC isolated.
The production material within our production does not include following toxic chemicals:
Polychlorized Biphenyl (PCB), Polychlorized Terphenyl (PCT), Pentachlorophenol (PCP), Polychlorinated naphthalene
(PCN), Polybrom Biphenyll (PBB), Polybrom Bipheny-oxyd (PBO), Polybrominated Diphenylether (PBDE), Polychlorinated
Diphenylether (PCDE), Polydibromphenyl Oxyd (PBDO), Cadmium, Asbestos, Mercury, Silicia.
24.
R
EAD
-
OUT OF THE
S
OFTWARE
R
EVISION
L
EVEL
PISA utilizes a microcontroller with a dedicated firmware to control the whole unit. The revision level of the used
firmware can be determined as follows:
Press and hold the reset button before applying the input voltage. The pattern of the four red LEDs shows the
firmware revision level.
Revision
level
LED 1
LED 2
LED 3
LED 4
A
OFF OFF OFF ON
B
OFF OFF ON OFF
C
OFF OFF ON ON
D
OFF ON OFF OFF
E
OFF ON OFF ON
F
OFF ON ON OFF
G
OFF ON ON ON
H
ON OFF OFF OFF
I
ON OFF OFF ON
J
ON OFF ON OFF
K
ON OFF ON ON
L
ON ON OFF OFF
M
ON ON OFF ON
N
ON ON ON OFF
O
ON ON ON ON
Feb. 2012 / Rev. 1.3 DS-PISA11.CLASS2 - data sheet -
All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278-0 Germany
18/19