PISA11.CLASS2
PISA11-Series
P
ROTECTION
M
ODULE
24V,
4
O
UTPUTS
16.
T
ERMINALS AND
W
IRING
All terminals are easy to access when mounted on the panel.
Input, outputs and signal terminals are separated from each other to help in error-free wiring.
Input and Output
Signals
Type
screw terminals
plug connector
Solid wire
0.2-6mm
2
0.2-1.5mm
2
Stranded wire
0.2-4mm
2
0.2-1.5mm
2
AWG (American Wire Gauge)
24-10 AWG
24-16 AWG
Wire stripping length
7mm / 0.28inch
6mm / 0.24inch
Screwdriver
3.5mm slotted or
Pozidrive No 2
2.5mm slotted
Recommended tightening torque
0.8Nm, 7lbs.in
0.35Nm, 3lbs.in
Instructions:
a) Use NEC Class 2 rated wires for the output
b) Use appropriate copper cables that are designed for minimum operating temperatures of:
60°C for ambient up to 45°C and minimum
75°C for ambient up to 60°C and minimum
90°C for ambient up to 70°C.
c) Follow
national installation codes and installation regulations!
d) Ensure that all strands of a stranded wire enter the terminal connection!
e) Up to two stranded wires with the same cross section are permitted in one connection point.
f) Screws of unused terminal compartments should be securely tightened.
g) Ferrules are allowed.
Feb. 2012 / Rev. 1.3 DS-PISA11.CLASS2 - data sheet -
All parameters are specified at 24Vdc input, 25°C ambient temperature and a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278-0 Germany
13/19
