Digital Conference System (Controlled by D-3001)
9
Use Up and Down button to increase/decrease the value of speech capacity, the
value ranges from 1 to 6.
2)
Mode Value Setting
Use Up and Down button to switch to the option
“Mode”.
Press Enter button to enter into speech mode selection interface.
Use Up and Down button to select the speech mode you need.
There are five speech modes available, including FIFO, OPEN, APPLY, PPT, VOICE.
FIFO (first in first out)
a)
Not at the maximum speech capacity, discussion unit presses Speak key to begin
speech.
b)
At the maximum speech capacity, the last discussion unit entered will replace the
first live discussion unit to keep the same capacity.
OPEN (queue)
a)
Not at the maximum speech capacity, discussion unit presses Speak key to begin a
speech.
b)
At the maximum speech capacity, then other discussion units can only apply for the
priority to speak. When one live microphone is off, then the discussion unit who
firstly enter into the queue will be automatically turned on.
APPLY
a)
Not at the maximum speech capacity, the discussion unit presses the Speak key, it
will enter into applying state, and its microphone can only be switched on by the
chairman unit of highest right.
b)
At the maximum speech capacity, discussion unit can still apply a speech until
chairman unit A001 permit applying units up to the speech capacity to speak. At that
time, the applying operation of rest discussion units will be automatically switched
off.
PTT (push-to-talk)
a)
Not at the maximum speech capacity, press and hold on the Speak key on the
delegate, and then it will be switched on. Release this button to finish speech.
b)
At the maximum speech capacity, no more delegate microphone will be switched on.
VOICE (voice-activated)
a)
Not at the maximum speech capacity, s peak and focus closed to the microphone,
and then it will recognize your voice and switch on your microphone. After you finish
your speech, the microphone will be automatically switched off when it reaches at
Value Description
