PTM T-FOLD, Руководство пользователя

Страница: 43 / 44

T•FOLD User Guide
Page 42
ERROR MESSAGE INFO RECOVERY ACTION
Reference
Flapper 3 fault
1. Turn machine OFF.
Turn it ON again and
check if the same
message appears.
2. Check the Movement
Mechanism for foreign
objects
3.5.2 "Switching the T•FOLD
OFF" p.33
3.5.1 "Switching the T•FOLD
ON" p.32
6.5 Maintaining the Movement
Mechanism of Flappers 1, 2 and 3
p.40
Flapper 4 fault
Turn machine OFF.
Turn it ON again and
check if the same
message appears.
3.5.2 "Switching the T•FOLD
OFF" p.33
3.5.1 "Switching the T•FOLD
ON" p.32
Flapper 5 fault
Turn machine OFF.
Turn it ON again and
check if the same
message appears.
3.5.2 "Switching the T•FOLD
OFF" p.33
3.5.1 "Switching the T•FOLD
ON" p.32
6.2.3 Maintaining the Movement Mechanism of Flappers 1, 2 and 3
The Movement Mechanism includes Drive Belt, Pulley & Roller which can collect dust & lint in their
“teeth”. An excessive build up can cause the moving mechanism to “stuck” during folding.
The Drive Belt & Gear are driven by the Motor, and in turn drive the Flapper itself up & down during
the folding process. These components are located is directly under the Flapper, refer fig. 5-1
Do not perform this procedure for flappers 4 and 5 - it will lead to damage of flappers’ 4, 5
moving mechanism.
TABLE 6-3 ERROR MESSAGE AND RECOVERY
ACTION
FIGURE 6-1 FLAPPER MOVEMENT MECHANISM