PTM T-FOLD, Руководство пользователя

Страница: 16 / 44

T•FOLD User Guide
Page 15
General safety instructions that must be observed when operating the equipment are explained
below.
The operator’s product maintenance procedures are described in the customer
documentation supplied with this product. Do not carry out any maintenance procedures
not described in the documentation.
This product features safety design to not allow operators to access hazardous areas of the
product. These hazardous areas are shielded from users / operators by covers or protectors
which will require tools to remove. Never remove these covers or protectors in order to
prevent electric shock or other injury.
To avoid the risk of electric shock and fire accident, switch off and unplug the product
promptly in the following conditions, then contact your local PPS representative:
•
The product emits smoke or its surface is unusually hot
•
The product emits unusual noise or odour
•
The power cord is cracked or otherwise deteriorated
•
A circuit breaker, fuse or any other safety device becomes activated during
operation of this product
•
Any liquid is spilled into the product
•
The product is soaked in water
•
Any part of the product is damaged
Do not insert any object into slots or openings of this product
Do not put any of the following items on the product:
•
Containers containing liquid, such as water glasses, coffee cups etc.
•
Metal objects such as staples or clips
•
Heavy objects
If liquid is spilled over or metal objects slip into the product, it may cause electric shock or a
fire accident.
Switch off and unplug the product before cleaning to prevent any risk of injury. Clean using
a damp cloth. Do not use liquid or aerosol cleaners.
WARNING