PSMailers PSM10K, Руководство по эксплуатации

Страница: 22 / 24

PS M ailers
™
PSM10K
800.464.5030 • psmailers.com
22
Troubleshooting
Once you’ve identified which fold plate needs to be adjusted,
remove it from the machine. If the fold is crooked, check to
make sure that the paper stop is parallel to the front edge of
the fold plate. Check that the indicator points on the paper
stop indicate the same reading on the two scales of the fold
plate. Also check the feed table to make sure that paper guides
are snug against the paper stack. If the fold is just a bit off of
the perforation, adjust the paper stop by the amount that the
fold is off. If the fold is happening early, then move the paper
stop away from the open end of the fold plate. If the fold is
happening late, then move the paper stop towards the open
end of the fold plate.
Paper Feed Problems
Double Feeds
If you’re having problems feeding two forms at a time
occasionally:
1. Turn the Feed Gauge Adjustment Screw 1/4 turn
counter-clockwise.
2. Try running the forms again.
3. If the problem persists:
a) Try another 1/4 turn on the Feed Gauge
Adjustment Screw.
b) Try reducing the size of the paper stack
on the Feed Table.
c) Try resetting the Feed Gauge.