PSMailers PSM10K, Руководство по эксплуатации

Страница: 16 / 24

PS M ailers
™
PSM10K
800.464.5030 • psmailers.com
16
Machine Operation
➊
➋
C-Folds & EC-Folds
➊
V-Folds
➋
➊
Z-Folds & EZ-Folds
Loading the Feed Table
Before loading the feed table, square up the stack of paper you
are going to load by placing it on edge on a flat surface. Place the
stack onto the table so the front of the stack butts up against the
feed gauge cover (
do not push hard).
The proper orientation of the paper when loaded onto the feed
table depends on the type of fold you are doing and the layout
of your form. The diagrams below show the order in which folds
will be performed when run through the machine with the right-
hand paper edge being loaded into the machine first (red arrow
shows paper path).
All forms should be loaded with glue on the leading edge facing
up (the glue is usually visible as yellow, blue or red stripes
around the edge of the form). With
Z- and EZ-Folds you have
multiple ways to load the form and still have glue on the leading
edge facing up, either one will work. With
EZ-Folds though, care
must be taken to ensure the upper fold plate is set to the proper
length for the leading fold (the bottom fold plate setting remains
the same either way).
Feed Table Capacities
11˝ Forms: 150 Sheets; 14˝ Forms: 100 Sheets