PSMailers PSM10K, Руководство по эксплуатации

Страница: 17 / 24

psmailers.com • 800.464.5030
PS M ailers
™
PSM10K
17
Machine Operation
Operating the PSM10K
The PSM10K can operate in two modes: Manual and Batch.
• Manual Mode: the machine runs forms and keeps a running
count until stopped by the operator.
•
Batch Mode:
the Batch Total is set and the machine runs
forms until the Batch Total is reached, at which point the
machine stops.
Operating in Batch Mode (optional counter)
To enter Batch Mode , press
the Mode button until the
screen displays Batch Mode
(Figure 14).
Setting the Batch Total
1. Make sure that the machine is in Batch Mode
2. Use the Up or Down button to change the Batch Total
(displayed in the lower right corner of the screen). Both
buttons can be held down to continuously change the
count, and if the change is over 20, holding the button
down causes the count to change in steps of 10, though
at this point releasing and pressing the button once will
still increase the count one at a time.
3. Press the Mode button once to lock in the number.
Running in Batch Mode
When the Batch Total is set, press the Run button to start the
machine. The machine will run and the Batch Count of forms
processed will be displayed in the middle of the lower line of
the screen
(Figure14). Press Stop to stop the machine. This
will not reset the Batch Total or the Batch Count. Press Run
again to start the machine.
Figure 14: Batch Mode