Psion Teklogix PX750, Руководство пользователя

Страница: 258 / 278

D-26 Psion Teklogix NEO Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
UPC/EAN Shared Settings
D.5.9 UPC/EAN Shared Settings
Extended Coupon Code
This parameter specifies whether or not the imager will read only UPC-A/EAN-13 bar
codes that have addenda.
D.5.10 Code 93
Enabled
Set this parameter to on to enable “Code 93”.
Minimum and Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –
0 to 80.
D.5.11 Codabar
Enabled
Set this parameter to on to enable “Codabar”.
Start/Stop Strip
Codabar can use the following sets of characters as start and stop characters:
a, b, c, d
A, B, C, D
a, b, c, d, /, t, n, *, e
DC1, DC2, DC3, DC4
Setting this parameter to
on strips the start and stop characters from this bar code.
Check Char
When this parameter is enabled, before data is output, the “Codabar” symbol integrity is ver-
ified based on a parity character that must be present in the code. If the parity character is not
part of the code, the code is not output. Keep in mind the parity character may not be part of
your output setup; in this case, this parameter should be turned
off .
Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.