Psion Teklogix PX750, Руководство пользователя

Страница: 211 / 278

Appendix C: Bar Code Settings
Codabar
Psion Teklogix NEO Hand-Held Computer User Manual C -13
C.1.13 Codabar
Enabled
Set this parameter to on to enable “Codabar”.
Set Length L1 And Set Length L2
Lengths for “Codabar” can be set for Any length , Length within a range , One discrete
length or Two discrete lengths . The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled
Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing
One discrete length allows you to decode only those bar codes of a specified
length. Choosing Two discrete lengths allows you to specify two lengths of bar codes that
may be decoded. Length within a range allows you to decode a code type within a speci-
fied range from 5 to 55 .
CLSI Editing
When enabled, this parameter strips the start and stop characters and inserts a space after the
first, fifth, and tenth characters of a 14-character Codabar symbol.
NOTIS Editing
When enabled, this parameter strips the start and stop characters from decoded
Codabar symbol.
Length Restriction
Refer to “Length Restriction” on page C-7 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-8 for details.
C.1.14 MSI Plessey
Enabled
Set this parameter to on to enable MSI Plessey .
Note: Symbol length does not include start and stop characters.