Psion Teklogix Omnii XT10, Руководство пользователя

Страница: 331 / 358

Psion Teklogix Omnii XT10 Hand-Held Computer User Manual D-25
Appendix D: Teklogix Imagers Applet
Bar Code Symbologies – Descriptions
Options
Adding, Editing and Removing Triggers
For instruction about adding, editing and removing triggers, refer to “Manage Triggers” on
page 104.
D.5 Bar Code Symbologies – Descriptions
To view all symbologies available for the imager:
• Tap on the Barcoding tab, and tap on All .
D.5.1 Options
Auto Retry On Failed Decode Enabled
Setting this parameter to on allows the imager to repeat the image capture attempt if the
initial attempt fails. The number of retries is dependent on the value assigned in the next pa-
rameter,
Max Number of Auto Retry . If this parameter is set to off , the imager will only
attempt the image capture once.
Note: Remember that if you want to edit the symbologies, the preset you want to
change must be active. Highlight the preset you want to edit, and tap on the
Activate button – an A is added at the far right of the preset. With the activated
preset highlighted, double-tap on the Edit button.